DC 12v 2000L per hour rate lift 30m for deep well farm home and agricultural irrigation solar water pump

United States (US)


194 in stock


Product Description



Max head: 30m                                        Max flow: 2000L/H

Power:144w                                              Driven by: Solar power    

Outlet:1.26in                                             Intake:76mm

Body length:420mm                               Voltage:12v

Cable length:1m                                        Warranty:1year






1.DC input, wide working voltage range(12v-20v).  

2.Built-in MPPT which can make the best use of the solar energy.

3.The controller is internal which means the pump can be directly connected to solar panel.

4.This product is very suitable for water-lacking area and power shortage area.

5.Non-toxic, pollution-free.

6.Brushless motor is used inside, the working time is 10 times longer than the brush motor.

7.Over-voltage protection / Under-voltage protection / Over-current protection / Over-load protection



Tank/Cistern filling

Village or family water supply

Water supply for farm

Garden/courtyard irrigation system

Livestock watering

Swimming pool filling


Water supply for bivouac or camping car

Solar water circulating system

Renewable energy projects




1. This pump is a solar powered water pump, 36v is ideal input voltage. The solar panels’ power should be 1.5~2 times bigger than the pump. 2 or 3 pcs 12 volts batteries connected in series also can be power source.

2. Connect the pump to solar panels directly, if the total length of the cable between pump and solar panel is longer than 100ft, we strongly recommend 9 or 8AWG wire.

3. Safety rope or wire is very important for deep well pumps, because the safety rope or cable will be the only way to retrieve the pump from the bottom of the well, we recommend a good stainless steel cable rather than rope.

4. If your solar panel kit is not powerful enough and you don’t want to add more, a couple of 12v batteries is a good option, they can help to hold the input voltage above the “low voltage cut off point”, however, sufficient solar panels is still the best power source.


Warm Tips:



1Do not mix the positive(+) and negative(-) connection.

2.Do not operate long time while there is no water in the pump.

3.The pump is submersible which means it must be full submerged in the water.

4. Clean the pump’s intake and outlet port when you think the flow rate is not as high as before.

5. Make a “sleeve” for the pump if you want use it in impure water.

PS: As for the pump cable, we have two different kinds of cable colour, one is black color and anonther is yellow color. and the cable color is at random when we deliver. So maybe you will received the pump with black color cable. or you will received the pump with yellow color cableHope you can understand. 


Depending on different  destination,we may use DHL,UPS,Fedex,EMS.


Import duties

International buyers please note:

  a.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. We will try our best to reduce the risk of the custom duties.
  b.Please check with your country’s customs office to determine what these additional costs will be prior to buying.



1. packing list: one pump with 5m electric wire,one use manual

2.packing size:52cm*12cm*12cm

3.packed in carton case



Q. How to choose a proper size pump for my well?

A. The diameter of the well casing at least should be  bigger than the pump’s diameter.

Q. What’s the difference between max lift and working lift?

A. Max lift means the flow rate will be 0 at that height because the pump’s actual flow rate will be less and less as the working lift increases; recommended working lift is the reasonable height to get sufficient water. 

Q. Can I test the pump without water?

A.The submersible pump’s motor and internal controller are immersion, the motor and controller will be overheating if there is no water go through them, therefore the pump should be fully submerged in water.

Q. How to extend the pump’s service life?

A. 1) Put the pump in proper depth range, make sure the pump isn’t overloaded. 2) Make sure the pump is fully submerged in water. 3) Make a sleeve for the pump as an extra strainer if the water contains too much impurities. 4) Check the pump’s intake and outlet regularly if the water is not very clean.

Q. What is your after-sales service?

A. If the pump fails because of quality problem, Please take some actual pictures and record a detailed  video and send to us. We will deliver a new pump free after we verify, the shipping cost is shared by both buyer.

Return Policy                                         

1.All products must be checked carefully and packaged in good condition before dispatch if you have some issues with the goods you have bought from us and want to send back.

All accessories must be included.

2. Please provide us the tracking No.,reason for sending back and also your ebay ID.

The shipping cost (sending back) is buyer’s responsibility.

3.we will send you new one or refund as you request after we receive original item. Shipping and handling are non-refundable. Buyers are responsible for all return shipping costs incurred. We are gladly to assist you with any problems including refund if necessary.



1.We maintain high standards of excellence and strive for 100% customer satisfaction!

2. Feedback is very important to us. If you are not satisfied with the item, please contact us so we can address your concern.

3. Please contact us BEFORE you leave neutral or negative feedback.



Contact us

If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays.










12v dc



















There are no reviews yet.

Be the first to review “DC 12v 2000L per hour rate lift 30m for deep well farm home and agricultural irrigation solar water pump”